http://blog.rodbailey.com/uploads/MLR_PartialUserGuide.pdf
from here:
read article ....MLR SP24XC Cable
This information copied from the manual page 10, Version 2.0
Looking at the connector you will find 3 plastic location notches.
Using the same numbering scheme as the manual, pin 3 is directly between the
2 small notches. The other 4 pins are numbered clockwise.
Alternatively, if the GPS is held upright with the connector at the top, Pin
1 is at 6 o'clock 2 at...
Looking at the connector you will find 3 plastic location notches.
Using the same numbering scheme as the manual, pin 3 is directly between the
2 small notches. The other 4 pins are numbered clockwise.
Alternatively, if the GPS is held upright with the connector at the top, Pin
1 is at 6 o'clock 2 at...
